A cutting-edge technology
Our syringe pumps operate with a servomotor that drives a piston inside a sealed enclosure. This allows it to generate pressures of up to 1000 bars.
Heating systems are available, either waffle iron or heating mat, to reach temperatures up to 125°C.
Its mounting on a wheeled chassis makes it easy to transport.
Available with carbon, hastelloy, stainless steel, or titanium body.
From singles to doubles
The combination of the two bodies gives you access to new features: dual mode, and GCode.
The dual mode, pressure or flow, allows continuous injection or withdrawal, without the constraints of a single body structure.
GCode is a programming method which allows, using a text file, to transmit a succession of commands to the pump. Creating procedures therefore becomes child's play.
The wonders of carbon
Carbon cell technology, combined with X-ray imaging, offers new possibilities. Carbon, transparent to X-rays, has the advantage of allowing visual inspection of the inside of the body.
Doping the fluids to contrast them with the imaging then becomes useless.
A technical base that adapts to your needs
An admissible pressure of up to 1000 bars, a temperature of up to 125°C, a capacity of 60, 300, 500, or 1000 cm3, our machines are versatile and will meet your needs.
A special request? Contact us!
A complete interface
The pump has a graphical interface developed in Labview. Its functionalities are diverse :
- Operating modes: pressure (single or ramp), volume, or flow.
- Pump control according to user levels.
- View and save pressure, volume and flow data in .csv files.
Do you want to use your own HMI? Our pumps can be controlled using Modbus registers, accessible via an Ethernet or RS232 link.
Discover our range
| System Features | |
| Pressure range | 0 to 1000 bars |
| Flow range | 1074 cm3/h or 17.9 cm3/min in withdrawal 1074 cm3/h or 17.9 cm3/min in injection |
| Number of bodies | 1 |
| Capacity per body | 500 cm3 |
| Body material | Titanium |
| Mechanical characteristics | |
| Floor area | 0.486 m2 |
| Width | 60 cm |
| Depth | 81 cm |
| Height | 174 cm |
| Unloaded weight | 350 kg |
| Electrical specifications | |
| Supply | Three-phase |
| Power (excluding heating) | 7 000 W |
| Tension nominale | 400 V |
| Rated current | 10.5 A |
| Heating specifications | |
| Heating system | Iron shell |
| Power | 2 x 2 400 W |
| Temperature range | from 20 to 200°C |
| System Features | |
| Pressure range | 0 to 650 bars |
| Flow range | 1074 cm3/h or 17.9 cm3/min in withdrawal 1074 cm3/h or 17.9 cm3/min in injection |
| Number of bodies | 2 |
| Capacity per body | 300 cm3 |
| Body material | Titanium |
| Mechanical characteristics | |
| Floor area | 0.486 m2 |
| Width | 81 cm |
| Depth | 60 cm |
| Height | 170 cm |
| Unloaded weight | 215 kg |
| Electrical specifications | |
| Supply | Three-phase |
| Power (excluding heating) | 2 x 7000 W |
| Tension nominale | 400 V |
| Rated current | 2 x 10.5 A |
| Heating specifications | |
| Heating system | Carpet |
| Power | 2 x 2 400 W |
| Temperature range | from 20 to 200°C |
| System Features | |
| Pressure range | 0 to 650 bars |
| Flow range | 1074 cm3/h or 17.9 cm3/min in withdrawal 1074 cm3/h or 17.9 cm3/min in injection |
| Number of bodies | 2 with double bodies chassis ; 1 with separator chassis |
| Capacity per body | 60 cm3 |
| Body material | Carbon composite |
| Mechanical characteristics | |
| Floor area | 1.675 m2 |
| Width | 134 cm (Lead enclosure: 111 cm, enclosure cabinet: 23 cm) |
| Depth | 125 cm (Lead enclosure: 85 cm, pump cabinet: 40 cm) |
| Height | 174 cm |
| Unloaded weight | 750 kg (Pump assembly: 220 kg, lead enclosure without frame: 530 kg) |
| Electrical specifications | |
| Supply | Three-phase |
| Power (excluding heating) | 2 x 7 000 W |
| Tension nominale | 400 V |
| Rated current | 2 x 10.5 A |
| Heating specifications | |
| Heating system | Carpet |
| Power | 2 x 2 400 W |
| Temperature range | from 20 to 125°C |